How to set up and connect to WSU-SECURE using an iPhone

Following are instructions for setting up a secure wireless connection on the wireless@wayne network, using the WSU-SECURE SSID. (An SSID is the public name for a wireless network.)

Many steps are listed on this page, but the process only takes a few minutes and you only have to set up the WSU-SECURE connection one time.

Before you begin, please check the following:

Download and install security certificate
  1. Press the Home button on your phone, and tap Settings.
  1. Tap Wi-Fi.
  1. Connect to a Wi-Fi access point:

    Under Choose a Network... select WSU.
  1. Open Safari. A Welcome to the WSU Wireless Network Web page opens.

    1. In the upper-left corner of the Web page, type in your WSU AccessID, e.g. xy6789, (for User ID) and password.

      Tap Go.
    2. You are redirected to WSU's Website.
  1. To clear the address bar, tap the X in the right-corner, and type:
    nagios.cc.wayne.edu/ca.der.

    Tap Go.
  1. To begin installing a Security Profile, tap Install.
  1. Tap Install Now.

Configure your WSU-SECURE wireless network connection
  1. Press the Home button on your phone, and tap Settings.
  1. Tap Wi-Fi.
  1. Under Choose a Network…,

    tap Other....
  1. For the Network Name, type in: WSU-SECURE.

    Tap Security.
  1. At the bottom, tap WPA2 Enterprise.

    Then tap Other Network.
  1. For Username, type in your WSU AccessID, e.g. xy6789, and corresponding password.

    Tap Join.
  1. A Certificate window opens.

    Tap Accept.

Connect to WSU-SECURE

After accepting the certficate you are connected to the secure network.

You can check your connection under Settings, then Wi-Fi Networks.

If you connect successfully, you see a check mark and padlock icon next to WSU-SECURE.

You also can tell if you are connected if "WSU-SECURE" is listed as the Wi-Fi connection under Settings.

Note: WSU-SECURE automatically connects when you are near an access point (AP) that supports it.
  • If you cannot connect to the secure network, you are not by an AP that supports WSU-SECURE.
  • If you are near a WSU AP, you can use that connection method.

Check APs by building.